-
S-Hook
S-Hook
- Reference:
S-Hook
NF1901 S-Hook, stainless steel
-
Net Access Clips
Net Access Clips
- Reference:
Net Access Clips
Stainless steel net clips splice pieces of netting to allow easy removal of panels for access.
NF5001 Net access clips 50mm, stainless steel
NF5002 Net access clips 19mm, stainless steel
-
Split Pin
Split Pin
- Reference:
Split Pin
Split pins and anchor rivets are available for stone, masonry or brick. Insert the anchor rivet into a pre-drilled
hole and hammer the stainless steel split pin in position. Thread the cable through the hole in the split pin.
NF3301 25mm split pin, stainless steel
NF3302 38mm split pin, stainless steel
-
Vine Eyes
Vine Eyes
- Reference:
Vine Eyes
NF2301 Vine eyes 100X5mm, galvanizsed
NF2302 Vine eyes 100X5mm, stainless steel
-
Screw Eyes
Screw Eyes
- Reference:
Screw Eyes
The screws for wood are intermediate attachments.
NF1401 Screw eye 40×3.5mm galvanized
NF1402 Screw eye 40×3.5mm stainless steel
-
New Stainless Steel Girder Clips
New Stainless Steel Girder Clips
- Reference:
New Stainless Steel Girder Clips
The strong and hammer-on girder clip allows cable to be attached to steel beams.
NF1508 New girder clips 3-8mm, stainless steel
NF1509 New girder clips 8-14mm, stainless steel
NF1510 New girder clips 14-20mm, stainless steel
-
Stainless Steel Girder Clips
Stainless Steel Girder Clips
- Reference:
Stainless Steel Girder Clips
The strong and hammer-on girder clip allows cable to be attached to steel beams.
NF1505 Girder clips 3-8mm, stainless steel
NF1506 Girder clips 8-14mm, stainless steel
NF1507 Girder clips 14-20mm, stainless steel
-
Galvanized Girder Clips
Galvanized Girder Clips
- Reference:
Galvanized Girder Clips
The strong and hammer-on girder clip allows cable to be attached to steel beams.
NF1501 Girder clips 2-3mm galvanized
NF1502 Girder clips 3-8mm, galvanized
NF1503 Girder clips 8-14mm, galvanized
NF1504 Girder clips 14-20mm, galvanized
-
Hog Ring Tool
Hog Ring Tool
- Reference:
Hog Ring Tool
The bird net is attached to the net cable by hog rings. The hog ring tool is needed for this job.
NF3501 Hog ring tool
-
Hog Rings
Hog Rings
- Reference:
Hog Rings
The bird net is attached to the net cable by hog rings. The hog ring tool is needed for this job.
NF2701 Hog rings, galvanized
NF2702 Hog rings, stainless steel
-
Net Cable Grips
Net Cable Grips
- Reference:
Net Cable Grips
They are used with either 2mm or 3mm net cable
NF3001 Wire rope grip 3mm SS
NF3002 Wire rope grip gal, 3mm
-
Turnbuckles
Turnbuckles
- Reference:
Turnbuckles
The net cable is tensioned with the application of turnbuckles
NF2001 Turnbuckle, M5, stainless steel
NF2002 Turnbuckle, M6, stainless steel
NF2003 Turnbuckle, M8 Stainless steel
NF2004 Turnbuckle, M5, galvanized
NF2005 Turnbuckle, M6, galvanized
NF2006 Turnbuckle, M8, galvanized
